A23-14 Ozone Standard Generator

Home/A23-14 Ozone Standard Generator

Product Description

A23-14 Ozone Standard GeneratorApplication:

The use of ozone gas is increasing rapidly in a wide variety of applications, such as water treatment, odour control, and food processing. ATI’s A23-14 Ozone Standard GeneratorĀ is a portable generator designed to produce an ozone gas concentration below 1 PPM, which can be used for detector calibration at almost any location. The generator uses a compressed air cylinder to supply dry air to an ultraviolet cell where ozone gas is formed. The resulting flow of air with a small amount of ozone exits the generator cell through fluorocarbon outlet tubing that is used to deliver the ozone standard to a gas sensor.

Operation of the ozone gas generator is very simple. The UV generator cell is plugged into any convenient power outlet and the valve on the air cylinder is opened. The cylinder valve is a fixed flow regulator, therefore no flow control is required. The outlet tubing from the generator is connected to your ozone gas sensor for whatever period is needed for calibration and the system is then shut off, however each generator is individually marked with an accurate ozone gas concentration value measured prior to shipment.

Features and Benefits:

  • Accuracy +/- 0.1PPM
  • Simple operation, quick warm-up time of 1 minute
  • Generator output is nominally around 0.8 PPM






    Product Details